Operation of prolonging service life of medium frequency electric furnace equipment
Medium frequency electric furnace equipment is a relatively large equipment, so it can not be replaced easily. For this, we usually do more maintenance. The purpose of maintenance is not only to maintain the daily work of medium frequency electric furnace equipment, but also to extend the service life of medium frequency electric furnace equipment. Today, the manufacturer of medium frequency electric furnace equipment will introduce how to extend the service life of medium frequency electric furnace equipment Some basic operations of.
It is necessary to sinter the furnace body of medium frequency electric furnace in maintenance. It should be noted that if the medium frequency electric furnace equipment is used for the first time, the lining operation of the medium frequency electric furnace equipment should be carried out. In operation, the acid lining is more beneficial to the protection of the furnace body.
When lining, first prepare the materials to be used. Then a protective layer is made on the inner wall of the furnace to ensure the isolation of the internal induction coil. In addition, the one-time molding user needs to place it in a low-temperature fire for baking operation, and then wait for dozens of minutes, and it will condense into a solid entity. In terms of hardness, there is almost no requirement, as long as the melt is stirred and fed, it will not be broken.
The next step is sintering, which continues to bake for 24 hours in a slow heating mode until it is completely solidified. Users must complete the above two processes correctly, because they are the basis to ensure the long-term use of energy-saving medium frequency electric furnace.
In addition, in operation, generally speaking, the water flow of the system should be checked first. Check for water leakage. Keep a strict working style: avoid spraying energy-saving medium frequency electric furnace equipment from your fingers or body; cut off the power supply as soon as you find that the furnace body is red, etc.; if you find that the furnace lining is broken, you should immediately hit the furnace lining again.
It can be seen that the method of prolonging the service life of the energy-saving intermediate frequency electric furnace is not only in the process of use, but also some measures that need to be done before the use. The first operation is to provide a protective film for the energy-saving intermediate frequency electric furnace, so as to extend the service life of the intermediate frequency electric furnace equipment in the process of use.
